Printronix T4204 - Manual (Page 118)

118
Chapter 3 IGP/VGL Emulation
Width Limit
When enabled, the system will limit the length and width for expanded
characters to a limit shown in Table 5, which shows the maximum width
allowed for a specific height in the range of 00 through 40 (0.0 through 4.0
inches).
Absorb After ^PN
• Disable. All line terminators that immediately follow the ^PN command
are sent to the printer and processed.
• Enable. All line terminators that immediately follow the ^PN command are
ignored.
Table 5. Width Limit Table
Height
Param.
Max. Width
Allowed
Height
Param.
Max. Width
Allowed
00 99 21 51
01 99 22 53
02 3 23 56
03 6 24 58
04 8 25 61
05 11 26 63
06 13 27 66
07 16 28 68
08 18 29 71
09 21 30 73
10 23 31 76
11 26 32 78
12 28 33 81
13 31 34 83
14 33 35 86
15 36 36 88
16 38 37 91
17 41 38 93
18 43 39 96
19 46 40 98
20 48