Active igp emul menu – Printronix T4204 User Manual
Page 67
Active IGP EMUL Menu
67
Active IGP EMUL Menu
This ACTIVE IGP EMUL function allows the user to activate an installed IGP
VGL or PGL emulation. There are two methods for selecting the desired
emulation. The first is by selecting the emulation directly from the printer
menu. The second is by sending a host command which will switch the
emulation automatically (see the appropriate
Programmer’s Reference
Manual for details).
When changing from one IGP emulation to the other, the printer will load the
Power-up configuration. Thus, any setting performed before selecting those
emulations and not saved in NVRAM will be lost.
IMPORTANT
When the ACTIVE IGP EMUL is switched from one IGP emulation to
another, the printer will load the settings saved under the Power-Up
Config. menu. These settings may not be the current settings in use
prior to switching the Active IGP emulation. The Print Mode, Media
Sensor, Media Handling, Calibration (Trans or Refl Values), Page Length
and Width and numerous other settings in use will change to the
settings saved under the Power-Up Config. menu. Users should
therefore insure that all desired settings are saved as the printer Power-
Up Config. menu settings prior to switching the Active IGP emulation.
ACTIVE IGP
EMUL
(from page 54)
IGP/PGL*
IGP/VGL
* = Factory Default