Interface options, Coax/twinax host interface, Printnet 10base2 (bnc) (externally mounted) – Printronix T4204 User Manual
Page 208: Printnet 10base-t (utp) (externally mounted), Printnet 10base-t (utp) (internally mounted)
208
Appendix B
Hardware Options
Interface Options
Coax/Twinax Host Interface
The coax/twinax host interface option functions as a protocol converter to
allow the direct connection of the printer to an IBM host computer that uses
either a coax or a twinax data interface. This option should be installed only
by an authorized service representative.
PrintNet 10Base2 (BNC) (Externally Mounted)
Permits placing the printer on a LAN rather than attaching it directly to a host
system. It connects externally to the T4204 Centronics parallel port. Only
Ethernet is supported. This option is field-installable by the operator.
PrintNet 10Base-T (UTP) (Externally Mounted)
Permits placing the printer on a LAN rather than attaching it directly to a host
system. It connects externally to the T4204 Centronics parallel port. Only
Ethernet is supported. This option is field-installable by the operator.
PrintNet 10Base-T (UTP) (Internally Mounted)
Permits placing the printer on a LAN rather than attaching it directly to a host
system. It is mounted inside the printer. Available as a factory option only. Not
supported if the Coax/Twinax option is installed.