Printronix T4204 - Manual (Page 117)

IGP/VGL Submenu
117
True Vert 1/10
• Disable. When disabled (the default) and in High Resolution, a vertical
line’s length in one inch and 1/10 inch increments is interpreted as 70/72
inch and 7/72 inch respectively.
• Enable. When enabled, a vertical line’s length is interpreted exactly,
which is 72/72 inch in one inch increments.
Absorb after ^PY
• Absorb Motion. Prevents paper motion following a system terminator in
a graphics ^PY command.
• Absorb All. The system ignores all the data and terminator until a host
generated terminator is detected.
• Disable. System terminators following a graphics command are sent to
the printer and result in paper motion.
UPC Descenders
• Enable. UPC/EAN bar codes are printed with descenders, even if there is
no human readable data.
• Disable. UPC/EAN bar codes are printed without descenders if there is
no human readable data.
Rot. Char Size
• Adjusted. Rotated (clockwise/counterclockwise), expanded characters
have a different size than an unrotated character with the same size
parameters.
• Not Adjusted. Rotated, expanded characters will be the same size as
unrotated characters with the same size parameters.
Ignore Spaces
• Disable. Trailing spaces are not deleted from alphanumeric elements in a
graphics pass.
• Enable. Trailing spaces are deleted from alphanumeric elements in a
graphics pass.
Midline PY (includes ^PN)
• Disable. The Graphics mode Enabled command, ^PY, must be the first
three characters of a line.
• Enable. The ^PY or ^PN can occur anywhere in a line.