Security configuration, Security configuration –12 – Polycom KIRK KWS6000 User Manual
Page 100
Advertising
KIRK Wireless Server 6000 Installation and Configuration Guide
10–12
Security Configuration
It is possible to change the password for the unit from the
Configuration/Security page.
1
Click Configuration, and then click Security (optional).
Figure 10-10
Adm. Page: Configuration/Security page
2
In the Current password field, type the current password.
3
In the New username field, type a new username.
4
In the New password field, type a password.
5
In the New password again, type the password again.
6
Click Allow remote logging if it should be possible to perform remote
logging (Useful in case of problem solving).
7
Click Save.
Advertising