Polycom KIRK KWS6000 - Manual (Page 105)

11–1
11
Configuring KIRK Media Resources
This section provides you with information on how to power up the media
resource and connect the unit to a computer. It also provides information on
how to configure a media resource through the web based Administration
Page using either DHCP or static IP address.
This section includes information about:
•
“Powering up the KIRK Media Resource” on page 11-1
• “Connecting a Computer to the KIRK Media Resource” on page 11-2
• “Accessing the Web Based Administration Page” on page 11-2
• “Configuring a KIRK Media Resource Using DHCP” on page 11-6
• “Configuring a KIRK Media Resource Using Static IP Address” on
page 11-7
• “Checking Indicators” on page 11-7
• “Making a Back-Up of the Configuration File” on page 11-8
Powering up the KIRK Media Resource
After installing the media resources you need to power up the unit using:
• Local Power Supply
Note
The media resource is pre-configured to use DHCP. It is recommended to
configure the media resource using DHCP.