Polycom KIRK KWS6000 - Manual (Page 106)

KIRK Wireless Server 6000 Installation and Configuration Guide
11–2
Connecting a Computer to the KIRK Media Resource
The media resource communicates with the computer through a cross-over
patch cable.
Figure 11-1 Cross-Over Patch Cable (RJ45)
1
Connect the cross-over patch cable to the computer.
2
Connect the cross-over patch cable to the ETH port of the media resource.
Accessing the Web Based Administration Page
In order for your computer to communicate with the media resource it is
necessary to change the computer’s Internet Protocol Properties to use the
following:
Note
The LAN port of the media resource is a RJ45 connector.