Polycom KIRK KWS6000 - Manual (Page 110)

KIRK Wireless Server 6000 Installation and Configuration Guide
11–6
Figure 11-5 Adm. Page: Enter Network Password dialog box
1
In the User Name field, type admin.
2
In the Password field, type ip6000.
3
Click OK.
Configuring a KIRK Media Resource Using DHCP
This section describes how to configure a media resource using DHCP.
If the KWS6000 is configured using a static IP address, it is possible to assign
options to the DHCP server making it extremely easy to configure all media
resources. For more information about assigning options to the DHCP server,
refer to “Assigning DHCP Server Options” on page 9-2.
Note
It is recommended to configure the media resource using DHCP. The
media resource is pre-configured to use DHCP.
Note
When assigning options to the DHCP server you do not need to configure
the media resource through the Administration Page of the media resource.
Just connect the media resource to the network.