Polycom KIRK KWS6000 - Manual (Page 150)

KIRK Wireless Server 6000 Installation and Configuration Guide
15–2
KIRK Wireless Server 6000
This section includes information about:
•
“Changing System User Name and Password” on page 15-2
• “Reading System Information” on page 15-3
• “Reading Statistics” on page 15-6
• “Making a Back-Up of the Configuration File” on page 15-10
• “Restoring Configuration File” on page 15-12
• “Updating the KIRK Wireless Server 6000” on page 15-13
• “Restarting the KIRK Wireless Server 6000” on page 15-14
Changing System User Name and Password
From the Administration Page it is possible to change the user name and
password for the system.
1
Click Configuration, and then click Security.
Figure 15-1 Adm. Page WS: Configuration/Security page
2
In the Current password field, type the current password.
3
In the New user name field, type a user name.
4
In the New password field, type a new password
5
In the New password again field, type the new password again to
confirm it.
6
Click Save to change the password.
Note
Ensure that you have opened the Administration Page of the KWS6000.