Polycom KIRK KWS6000 - Manual (Page 111)

Configuring KIRK Media Resources
11–7
Configuring a KIRK Media Resource Using Static IP
Address
This section describes how to configure a media resource using static IP
address.
This section contains information about:
•
“General Configuration” on page 11-7
• “Media Resource Configuration” on page 11-7
General Configuration
On the Configuration/General page you define IP, DNS and NTP settings for
the media resource.
Refer to
“General Configuration” on page 10-8 for a description.
Media Resource Configuration
On the Configuration/Media Resource page you configure the media
resource.
1
Click Configuration, and then click Media Resource.
Figure 11-6 Adm. Page Media Resource: Config./Media Resource page
2
In the Host field, type the address of the wireless server.
3
Click Save.
Checking Indicators
• Verify that the media resource LED indicator is continuously on,
indicating that the media resource is functional.
Note
The LED will not be on before the base stations are configured.