Polycom KIRK KWS6000 - Manual (Page 58)

KIRK Wireless Server 6000 Installation and Configuration Guide
7–2
Base Stations.The repeaters are mainly used in areas with limited traffic. The
KIRK Repeater is available with either 2 or 4 voice channels. It is wireless and
does not need physical connection to the KIRK Wireless Server, making it very
easy to install. The repeaters can be supplied with an external antenna making
it possible to create radio coverage in a remote area without cabling to the rest
of the installation.
The RF communication is provided according to the band standard at the site:
• Repeater - DECT provides four RF channels of 1.88 GHz, DECT standard,
used in Europe, Australia and South America.
• Repeater - USA DECT provides four RF channels of 1.9 GHz, USA DECT
standard, used in North America.
KIRK Repeater Types and Part Numbers
The repeater contains RF circuitry that comply with the local band standards:
UPCS, DECT, or ETSI DECT. The wall mounted repeater and the ceiling
mounted repeater is available as a full slot repeater. A full slot repeater covers
four simultaneous speech channels. These channels are borrowed from the
attached base station, and are not additional channels to the total number of
channels on the system.
The table below includes a list of available repeaters and their part numbers.
Note
The repeater is also termed by some manufacturers as the WRFP (Wireless
Radio Fixed Part).
Table 7-1 KIRK Repeater - Wall - Part Number
Variants of KIRK Repeaters Part Number
KIRK Repeater 1.8 GHz, 2 channels 0244 0300
KIRK Repeater Residential 1.8 GHz, 4 channels 0233 4600
KIRK Repeater Business 1.8 GHz, 4 channels 0233 4601
KIRK Repeater Business 1.9 GHz, 4 channels 0233 8200
KIRK Repeater with external antenna 1.8 GHz,
2 channels 0244 0000
KIRK Repeater with external antenna 1.8 GHz,
4 channels 0244 1600
KIRK Repeater with external antenna 1.9 GHz,
4 channels 0244 0200