Polycom KIRK KWS6000 - Manual (Page 62)

KIRK Wireless Server 6000 Installation and Configuration Guide
7–6
Figure 7-3 Repeater and External Antenna Installed on the Wall
Note: The external antenna used for the transmitter is to be
fixed-mounted on indoor permanent structures providing a separation
distance of at least 20 cm / 8 inches from all persons during normal
operation and must not be co-located or operating in conjunction with
any other antenna or transmitter. The maximum radiated output power is
1W e.i.r.p. For more information and technical support, please refer to
www.polycom.com.
Recording the Installation Information
After completing the installation of the repeaters, record the location of each
repeater.
Checking Indicators
Verify that the repeater LED indicator is continuously on, indicating that the
repeater is functional.
Powering the KIRK Repeater
Power Options
The power supply for the repeater is 9VDC, 300mA.
Repeater External Antenna
Only for repeaters supplied
with external antenna
connection)
External
antenna
cable (only
for repeaters
supplied
with
external
antenna
connection
Power
supply
cable
Holes for
wall
mounted
screws