Kirk media resource, Changing system user name and password, Kirk media resource –17 – Polycom KIRK KWS6000 User Manual
Page 165: Changing system user name and password –17
Advertising
System Management
15–17
2
After Administration Uptime click Soft restart.
A warning box appears.
Figure 15-27
Warning box
3
Click OK.
KIRK Media Resource
This section includes information about:
•
“Changing System User Name and Password”
•
•
•
“Updating the KIRK Media Resource Firmware”
Changing System User Name and Password
From the Administration Page it is possible to change the user name and
password for the system.
1
Click Configuration, and then click Security.
Figure 15-28
Adm. Page Media Resource: Configuration/Security page
2
In the Current password field, type the current password.
Note
Ensure that you have opened the Administration Page of the media
resource.
Advertising