Entering a system user name and password, Entering a system user name and password –5, How to access the administration page – Polycom KIRK KWS6000 User Manual
Page 117
Configuring KIRK Base Station
12–5
4
Click Use the following IP address, and then type 192.168.0.2 in the IP
address field.
5
In the Subnet mask field, type 255.255.255.0.
6
Click OK.
You can now reach the base station using a standard web browser.
How to Access the Administration Page
The web based Administration Page is accessed through a standard web
browser.
1
Open a web browser.
2
In the browsers Address bar, type http://192.168.0.1, and then press
ENTER.
Note: The base station is pre-configured with the IP address: 192.168.0.1
through the ETH port.
The Administration Page for the base station appears.
Figure 12-4
Main page of the Administration Page for base station
Entering a System User Name and Password
First time you access the Administration Page, you need to log on with user
name and a password.
Note
The default user name of the system is admin and the default password of
the system is ip6000. It is strongly recommended to change the password,
refer to
“Changing System User Name and Password”
.