Polycom KIRK KWS6000 - Manual (Page 78)

KIRK Wireless Server 6000 Installation and Configuration Guide
8–4
Installing Battery
Read the following information before you handle the batteries:
• Do not replace the batteries in potentially explosive environments, such as
rooms where flammable liquids or gases are present.
• The battery will explode if disposed of in a fire.
• Do not charge the batteries unless you use the approved charger and the
proper batteries.
• Only use battery type 84743411 in the 4020 Handset and 4040 Handset. Do
not use these batteries with other products. These batteries were designed
specifically for use with the 4020 Handset and 4040 Handset and the
charger ONLY. Improper use of the batteries may result in fire hazard.
• Only use battery type 84743418 (ICP73048) in the 5020 Handset. Do not
use this battery with other products. This battery was designed
specifically for use with the 5020 Handset and the charger ONLY.
Improper use of the battery may result in fire hazard.
• Only use battery type 84743424 (ICP73048) in the 5020 Handset. Do not
use this battery with other products. This battery was designed
specifically for use with the 5020 Handset and the charger ONLY.
Improper use of the battery may result in fire hazard.
• Do not do anything that would cause the battery to short circuit.
• Do not let the battery or the charger come into contact with conductive
metal objects.
Installing Battery on KIRK 4020/KIRK 4040/KIRK 4080 Handsets
..
Note
The battery is connected to the handset when it is shipped from the factory.
Warning The battery in a 4080 Handset must not be removed in a potentially
explosive atmosphere. Only use battery type 84743416 in the 4080
Handset.