Polycom KIRK KWS6000 - Manual (Page 90)

KIRK Wireless Server 6000 Installation and Configuration Guide
10–2
Connecting a Computer to the KWS6000
The KWS6000 communicates with the computer through a cross-over patch
cable.
Figure 10-1 Cross-over patch cable (RJ45)
1
Connect the cross-over patch cable to the computer.
2
Connect the cross-over patch cable to the ETH port of the KWS6000.
Accessing the Web Based Administration Page
In order for your computer to communicate with the KWS6000 it is necessary
to change the computer’s Internet Protocol Properties to use the following:
Note
The LAN port of the KWS6000 is a RJ45 connector.