Polycom KIRK KWS6000 - Manual (Page 176)

KIRK Wireless Server 6000 Installation and Configuration Guide
15–28
Updating the KIRK Base Station Firmware
The software of the base station can be updated. To update the software you
load a file to the system. Contact your distributor for newest software.
Updating KIRK Base Station Firmware
You can specify a range of base stations to be updated with new firmware.
1
Click Firmware, and then click Base Station.
Figure 15-42 Adm. Page WS: Firmware/Base station page
2
In the Firmware file field, click Browse.
A Choose File dialog box appears.
Figure 15-43 Adm. Page: Choose File dialog box
Note
The base station firmware is updated from the Administration Page of the
KWS6000.
Note
Ensure that you have opened the Administration Page of the KWS6000.