Kirk handsets, Environmental requirements, Electrical requirements – Polycom KIRK KWS6000 User Manual
Page 26: Kirk maintenance software, Software requirements, Kirk handsets –10, Kirk maintenance software –10, Software requirements –10
KIRK Wireless Server 6000 Installation and Configuration Guide
2–10
KIRK Handsets
Environmental Requirements
• The area where the handset is used must be within the temperature ranges
of 0°C and 40°C/32°F and 104°F.
• For correct battery charging, the room temperature must be between 0°C
and 25°C/32°F and 77°F. Therefore, the handset must not be placed in
direct sunlight. The battery has a built-in heat sensor which will stop
charging if the battery temperature is too high.
• For battery information, refer to
• The area where the handset is used must be between 20% and 80%
non-condensing relative humidity.
Electrical Requirements
The following electrical requirement must be met:
• The supplied power (power supply) for the charger must be 110 V to 120
V ac nominal (or 220 V to 230 V ac nominal), 50/60 Hz.
KIRK Maintenance Software
This section describes the computer requirements to run the installation and
maintenance tools of the handset and repeater.
Software Requirements
• OS: Windows 2000 (SP4), Windows XP (SP2), Windows Vista
• CPU: Minimum 400MHz (2000/XP), 1GHz (Vista)
• RAM: Minimum 256 MB (2000/XP), 1 GB (Vista)
• GPU/Display: XGA (1024x768)
• Harddisk: Minimum recommended harddisk size by OS and other
installed applications + 25 MB free space for the application.
Note
Depending on other applications running on the system, CPU, RAM and
harddisk may vary.