Panasonic AJ-HDX400P - Manual (Page 37)

4
Chapter 4 Adjustments and settings for recording
37
2
Turn the JOG dial button to move the arrow (cursor) to
the item which is to be set, and the sub menu screen
appears when the JOG dial button is pressed.
3
Turn the JOG dial button to move the arrow (cursor) to
the item which is to be set, and the setting item menu
screen appears when the JOG dial button is pressed.
**** MAIN MENU ****
SYSTEM SETTING
PAINT
VF
# OPERATION
FILE
MAINTENANCE
VTR MENU
USER MENU SELECT
4
Turn the JOG dial button to move the arrow (cursor) to
the item which is to be set, and the item’s setting flashes
when the JOG dial button is pressed.
6
Press the JOG dial button.
The setting stops flashing, and the setting is entered.
7
To change another setting item on the same page, repeat
steps 4 to 6.
8
Press the MENU button to exit the menu operations.
The menu setting mode is exited, and operation returns to
the normal operation mode.
5
Turn the JOG dial button to change the setting.
< OPERATION >
CAMERA ID
SHUTTER SPEED
SHUTTER SELECT
# USER SW
SW MODE
WHITE BALANCE MODE
USER SW GAIN
IRIS
< USER SW >
# USER MAIN SW :S.GAIN
USER1 SW :D.ZOOM
USER2 SW :DS.GAIN
To increment the value
Turn the JOG dial button in the clockwise direction as
viewed from the front of the camera.
To decrement the value
Turn the JOG dial button in the counterclockwise direction
as viewed from the front of the camera.
Each time the button is turned, the number changes by
one increment. When it is turned quickly, the number
changes quickly, and when it is turned slowly, the setting
can be adjusted finely.
To set an item to ON or OFF
To set an item to ON, turn the JOG dial button in the
clockwise direction as viewed from the front of the
camera. Conversely, to set an item to OFF, turn the
button in the counterclockwise direction as viewed from
the front of the camera.
4-6-3 Selecting the user menus
By performing menu operations, open the USER MENU
SELECT page from the MAIN MENU and then open the
setting item menu screens, and select only those items
required on the USER MENU.
Only the items which have been set are displayed as the
USER MENU items. For details on operation, refer to “4-6-2
Basic menu operations.”
< USER MENU SELECT >
(SELECT MODE)
# SYSTEM
PAINT
VF
OPERATION
FILE
MAINTENANCE
VTR
<Note>
Setting items are effective when “¢” is displayed. However,
the maximum number of items that can be set is 42 in the
case of camera related items (3 pages’ worth, with 14 items
per page, 14 a 3 = 42) or 14 in the case of VTR related items
(1 page’s worth, or 14 items).