Panasonic AJ-HDX400P - Manual (Page 96)

Chapter 7 Menu description tables
96
7-8-5 MIC/AUDIO1
TEST TONE NORMAL
ALWAYS
OFF
CHSEL For selecting the test signal.
NORMAL: The test tone signal is output to all
the channels when the CAM/BAR
switch has been set to BAR and the
CH1 AUDIO IN switch has been set
to FRONT.
ALWAYS: The test tone signal is always output
to all the channels when the CAM/
BAR switch has been set to BAR.
OFF: The test tone signal is not output.
CHSEL: The test tone signal is output to the
channels for which the CH1 or CH2
AUDIO IN switch has been set to
FRONT when the CAM/BAR switch
is set to BAR. It is not output to CH3
or CH4.
Item/
Data storage
Variable
range
Remarks
FRONT VR CH1 FRONT
W.L.
REAR
ALL
OFF For setting whether or not to make the audio
control operational for the input system
selected for CH1.
FRONT VR CH2 FRONT
W.L.
REAR
ALL
OFF For setting whether or not to make the audio
control operational for the input system
selected for CH2.
MIC LOWCUT CH1 FRONT
REAR
W.L.
OFF For selecting the microphone low-cut filter for
CH1.
MIC LOWCUT CH2 FRONT
REAR
W.L.
OFF For selecting the microphone low-cut filter for
CH2.
LIMITER CH1 ON
OFF For selecting the limiter for CH1.
LIMITER CH2 ON
OFF For selecting the limiter for CH2.
CUE REC SELECT CH1
CH2
CH1+CH2 For selecting the signals to be recorded for
the CUE channel.
C U F
C U F
C U F
C U F
MIC LOWCUT CH3 FRONT
REAR
W.L.
OFF For selecting the microphone low-cut filter for
CH3.
C U F
MIC LOWCUT CH4 FRONT
REAR
W.L.
OFF For selecting the microphone low-cut filter for
CH4.
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
AUTO LEVEL CH3 ON
OFF For selecting the method used to set the level.
AUTO LEVEL CH4 ON
OFF For selecting the method used to set the level.
REC CH3/CH4 SW
CH1/2 For selecting the signals to be recorded for
CH3 and CH4.
SW:
The signals complying with the
position of the CH3/CH4 selector
switch on the side panel are recorded.
CH1&2: The same signals for CH1 and CH2
are recorded for CH3 and CH4. The
CH3&4 input circuit is set to the
power-saving mode.
7-8-6 MIC/AUDIO2
WIRELESS WARN ON
OFF For selecting whether or not to output
warnings when the reception of the wireless
receiver is poor.
Item/
Data storage
Variable
range
Remarks
FRONT MIC
POWER ON
OFF For selecting the phantom power supply for
the front microphone.
REAR MIC POWER ON
OFF For selecting the phantom power supply for
the rear microphone.
AUDIO OUT ON
OFF For setting the audio output circuit.
OFF: The power to the output circuit is shut
down, and the signals of the circuit are
not output.
ON: The signals of the audio output circuit
are output.
MONITOR SELECT STEREO
MIX For selecting the format of the signals to be
output to the monitor.
FRONT MIC LEVEL –40dB
–50dB For selecting the input level of the front
microphone.
REAR MIC CH1
LVL –50dB
–60dB For selecting the input level of the rear
microphone.
REAR MIC CH2
LVL –50dB
–60dB For selecting the input level of the rear
microphone.
REAR LINE IN LVL 0dB
+4dB For selecting the rear line input level.
AUDIO OUT LVL 0dB
+4dB For selecting the rear audio output level.
HEADROOM 18dB
20dB For setting the headroom (reference level).
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F
C U F