Panasonic AJ-HDX400P - Manual (Page 97)

7
Chapter 7 Menu description tables
97
7-8-8 UMID SET/INFO
DEVICE NODE For displaying the ID number of the product.
Item/
Data storage
Variable
range
Remarks
COUNTRY NO-INFO For inputting the name of the user’s country.
“NO-INFO” is displayed until this is input.
ORGANIZATION NO-INFO For inputting the name of the user’s
organization or company. “NO-INFO” is
displayed until this is input.
USER NO-INFO For inputting the user’s name. “NO-INFO” is
displayed until this is input.
C U F
C U F
C U F
Item/
Data storage
Variable
range
Remarks
P.OFF LCD
DISPLAY ON
OFF For selecting whether or not to set the LCD’s
time code and display its count while the
power is off.
ON:
The time code can be set and
displayed even while the power is off.
OFF: While the power is off, the power to the
LCD section is turned off, and the time
code can be neither set nor displayed.
TC OUT TCG
TCG/TCR For selecting the TC OUT output.
TCG:
The time code generator value is
always output.
TCG/TCR: The time code generator value is
output with the E-E setting and the
time code reader value is output with
the playback mode.
C U F
C U F
TCG SET HOLD ON
OFF For selecting ON or OFF for the function that
without fail uses what was previously set as
the TCG value for recording when the TCG
value had been set before the power was
turned off and recording was then performed
after the power was turned back on again.
FIRST REC TC REGEN
PRESET For selecting whether or not to regenerate the
time code as the value on the tape during the
first recording after the power was turned on,
the cassette was inserted or a playback or
search operation was performed.
C U F
C U F
The underlining in the variable range column indicates the setting in the preset mode.
7-8-7 TC/UB
Item/
Data storage
Variable
range
Remarks
UB MODE USER
TIME
DATE
EXT
TCG
FRM RATE
REGEN For selecting the UB mode.
USER:
Selects the UB value set in the LCD
section.
TIME:
Selects the local time (hour, minute,
second).
DATE:
Selects the local date and time (last 2 digits
of year, month, date, hour)
EXT:
Sets the UB from the TC-IN as the slave.
The user value is retained if no value can
be read.)
TCG:
Inputs the TCG value unchanged.
FRM RATE:
Selects the same camera shooting data
(frame rate, etc.) as the VAUX UB (VITC
UB).
REGEN:
Reads the value recorded on the tape and
then continues to record from that value.
TC MODE DF
NDF For selecting the TC mode.
DF:
Drop frame
NDF: Non-drop frame C U F
C U F
VITC UB MODE USER/EXT
TIME
DATE
TCG
FRM RATE
REGEN For selecting the VAUX TC (VITC) UB mode.
USER/EXT:
When EXT is selected as the UB MODE
setting, the value concerned applies; with
any other setting, the USER value set by
UB is recorded.
TIME: The local time (in hours, minutes and
seconds) is selected.
DATE: The local date (last 2 digits of AD
year, month, day and hours) is
selected.
TCG: The TCG value is used as is for UB.
FRM RATE:
The same shooting information (frame
rate, etc.) of the camera as for VAUX UB
(VITC UB) is selected.
REGEN: The value recorded on the tape is
read and recorded continuously. C U F