Panasonic AJ-HDX400P - Manual (Page 85)

7
Chapter 7 Menu description tables
85
7-4-4 VF INDICATOR1
Item/
Data storage
Variable
range
Remarks
Item/
Data storage
Variable
range
Remarks
EXTENDER ON
OFF For selecting ON or OFF for the extender
display.
SHUTTER ON
OFF For selecting ON or OFF for the shutter speed
display.
FILTER ON
OFF For selecting ON or OFF for the filter No.
display.
WHITE ON
OFF For selecting ON or OFF for the AWB
PRE/A/B display.
GAIN ON
OFF For selecting ON or OFF for the currently
selected gain, S.GAIN and DS.GAIN display.
IRIS OFF
IRIS
S+IRIS
S OFF: Neither the super iris ON status nor
the aperture value is displayed.
IRIS: Only the aperture value is displayed.
S+IRIS: Both the super iris ON status and
aperture value are displayed.
S: The super iris ON status is displayed.
(The display or non-display of the aperture
value and that of the iris override are linked.)
CAMERA ID BAR
CAM
ALWAYS
OFF For setting the ID configuration during
recording.
BAR:
The ID is recorded when color bar
signals are provided.
CAM: The ID is recorded when the camera
images are provided.
ALWAYS: The ID is recorded at all times.
OFF:
The ID is not recorded at any time.
<Note>
If ON is selected as the ID MIX INH menu
item setting on the “7-9-1 OPTION” screen, it
is not possible to record the camera ID when
the images of the camera are to be recorded
even if CAM or ALWAYS is selected as this
menu item’s setting.
ID POSITION UPPER R
UPPER L
LOWER R
LOWER L For setting the location where the camera ID
is to be recorded.
UPPER R: Top right
UPPER L: Top left
LOWER R: Bottom right
LOWER L: Bottom left
ZOOM LVL ON
OFF For selecting ON or OFF for the zoom
position display.
COLOR TEMP ON
OFF For selecting ON or OFF for the color
temperature display.
DATE/TIME ON
OFF For specifying whether or not the date and
time are mixed simultaneously when the
CAMERA ID is recorded.
The underlining in the variable range column indicates the setting in the preset mode.
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
7-4-5 VF INDICATOR2
Item/
Data storage
Variable
range
Remarks
TAPE ON
OFF For selecting ON or OFF for the remaining
tape amount display.
BATTERY ON
OFF For selecting ON or OFF for the battery
voltage display.
AUDIO LVL ON
OFF For selecting ON or OFF for the audio level
meter display.
TC TCG
TCR
TCG/TCR
OFF For selecting the time code which is to be
displayed.
TCG:
The time code generator value is
displayed in the E-E mode.
TCR: The time code reader value is
displayed in the V-V mode.
TCG/TCR: The time code generator value is
displayed in the E-E mode, and the
time code reader value is displayed
in the V-V mode.
OFF: The time code is not displayed at
any time.
VTR WARNING ALWAYS
NORMAL
OFF For selecting how VTR warnings are
displayed.
ALWAYS: It is displayed every time a warning
has occurred.
NORMAL: It is displayed for 3 seconds when a
warning has occurred and also for 3
seconds after recording has started
and after recording has finished.
OFF: It is not displayed at any time.
SAVE LED SAVE&
TAPE
SAVE
For setting the operation of the SAVE lamp.
SAVE&TAPE:
The lamp lights up when the VTR
SAVE/STBY switch has been set to the
SAVE position. It is off during recording.
As the tape is approaching the end, it
starts flashing in tandem with the warning
alarm.
SAVE: The lamp lights up when the VTR
SAVE/STBY switch has been set to
the SAVE position. It is off during
recording.
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
USER BOX ON
OFF For setting whether or not to display the user
box.
7-4-3 USER BOX
Item/
Data storage
Variable
range
Remarks
USER BOX WIDTH 001
:
013
:
100
For setting the horizontal width of the user
box.
USER BOX
HEIGHT 001
:
013
:
121
For setting the vertical height of the user box.
USER BOX H POS –50
:
+00
:
+50
For setting the horizontal position of the user
box center.
USER BOX V POS –50
:
+00
:
+50
For setting the vertical position of the user box
center.
C U F E
C U F E
C U F E
C U F E
C U F E