Panasonic AJ-HDX400P - Manual (Page 88)

Chapter 7 Menu description tables
88
7-5-5 SW MODE
ECU DATA SAVE ON
OFF ON: The settings controlled by the ECU are
stored in the memory when the ECU is
disconnected from the camera
recorder.
OFF: No camera related settings are stored
in memory.
Item/
Data storage
Variable
range
Remarks
Item/
Data storage
Variable
range
Remarks
RET SW REC CHECK
D.ZOOM For selecting the RET switch function.
REC CHECK: The REC CHECK operation is
performed.
D.ZOOM: Digital zoom operations are
performed.
S.BLK LVL OFF
–10
–20
–30 For setting the super black level.
AUTO KNEE SW ON
OFF For selecting whether or not the AUTO KNEE
switch is to be used.
SHD,ABB SW CTL ON
OFF For selecting whether or not digital dark
shading is to be activated by pressing the
ABS switch for a prolonged time (at least 8
seconds).
COLOR BARS SMPTE
FULL BARS
SPLIT
ARIB For selecting the color bars to be used.
SMPTE:
SMPTE color bars
FULL BARS: Full color bars
SPLIT:
SPLIT color bars
ARIB: ARIB multi-format color bars
S.GAIN OFF L/M/H
S.GAIN For selecting the method used to release the
super gain mode.
L/M/H:
The mode is released by making a
change in the L/M/H switch position.
S.GAIN: The mode is released using only
the S.GAIN switch (USER switch).
DS.GAIN OFF L/M/H
DS.GAIN For selecting the method used to release the
digital super gain mode (cumulative gain).
L/M/H:
The mode is released by making a
change in the L/M/H switch position.
DS.GAIN: The mode is released using only the
DS.GAIN switch (USER switch).
The underlining in the variable range column indicates the setting in the preset mode.
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
C U F E
D.ZOOM SEL ZOOM
FOCUS For selecting how digital zooming is to be
executed.
ZOOM:
Digital zooming is performed at all
times.
FOCUS: Digital zooming is performed for
about 5 seconds as the focus
assist function. However, if
recording is initiated at any time
during the 5 seconds, the D.ZOOM
function will be forcibly released.
<Note>
The focus assist function works as D.ZOOM
a 2. D.ZOOM a3 or a4 will not work even if it
has been selected.
D.ZOOM a2 ON
OFF For selecting whether to enable the a2
selection when D.ZOOM has been allocated
to a USER button.
ON:
The a2 selection is enabled.
OFF: The a2 selection is disabled.
D.ZOOM a3 ON
OFF For selecting whether to enable the a3
selection when D.ZOOM has been allocated
to a USER button.
ON:
The a3 selection is enabled.
OFF: The a3 selection is disabled.
D.ZOOM a4 ON
OFF For selecting whether to enable the a4
selection when D.ZOOM has been allocated
to a USER button.
ON:
The a4 selection is enabled.
OFF: The a4 selection is disabled.