Panasonic AJ-HDX400P - Manual (Page 83)

7
Chapter 7 Menu description tables
83
Item/
Data storage
Variable
range
Remarks
DETAIL ON
OFF For selecting ON or OFF for DTL (H, V).
HIGH COLOR ON
OFF For selecting ON or OFF for the mode in
which the dynamic range of the colors is
expanded.
TEST SAW ON
OFF For selecting ON or OFF for the test signals.
FLARE ON
OFF For selecting ON or OFF for the flare
compensation.
H-F COMPE. ON
OFF For selecting ON or OFF for the mode in
which the wide-band DTL is increased.
7-3-12 $ CAMERA SETTINGS
GAMMA ON
OFF For selecting ON or OFF for the gamma
circuit.
S C U F E
S C U F E
S C U F E
S C U F E
S C U F E
S C U F E
7-3-11 FLARE
Item/
Data storage
Variable
range
Remarks
R FLARE 000
:
100
For performing the R FLARE setting.
G FLARE 000
:
100
For performing the G FLARE setting.
B FLARE 000
:
100
For performing the B FLARE setting.
7-3-10 GAMMA
Item/
Data storage
Variable
range
Remarks
MASTER GAMMA 0.35
:
0.45
:
0.75
For setting the MASTER GAMMA in 0.01
steps.
R GAMMA –15
:
+00
:
+15
For setting the R channel GAMMA.
B GAMMA –15
:
+00
:
+15
For setting the B channel GAMMA.
The underlining in the variable range column indicates the setting in the preset mode.
S U F E
S C U F E
S C U F E
S C U F E
S C U F E
S C U F E
S C U F E
GAMMA MODE
SEL STD
FILM LIKE1
FILM LIKE2 For selecting the GAMMA.
STD:
The standard video gamma
characteristics are selected.
FILM LIKE1: The cinema gamma characteristics
for video applications are selected.
At the factory, this setting is set in
scene file 4.
FILM LIKE2: The cinema gamma characteristics
for video applications are selected.
In this setting gradations in highlit
areas can be expressed better
than when FILM LIKE1 is selected.
<Note>
Some of the KNEE SLOPE setting values in
the “7-3-9 KNEE/LEVEL” menu have no effect
if film-like characteristics are selected for the
GAMMA MODE SEL item.
<Note>
All items in CAMERA SETTING are setting targets of the item
PAINT MENU SW($) R/W in the “7-6-2 CARD R/W SELECT”
screen.