Panasonic AJ-HDX400P - Manual (Page 58)

Chapter 5 Preparation
58
Using the NP-1 type battery pack
Using the V-mount type battery pack
Attach the V-mount adapter plate.
Insert it in the direction shown by the arrows, and slide it into
place.
1
Remove the battery holder.
2
Attach the NP-1 type battery case to the unit.
1 Tighten the mounting screws.
2 Tighten the power contact screws.
3 Insert the top of the detached cover in the direction
shown by the arrows.
4 Align the holes in the bottom of the cover (metal part)
with the holes at the bottom of the case, and use the
screws to attach the case.
<Note>
When mounting the battery holder, take care not to pinch
the connecting cord.
1
2
4
NP-1 type Battery case
3
3
Set the battery type.
Select the battery type using the BATTERY SELECT
menu item. This item is selected from the
<BATTERY/TAPE> screen on the VTR FUNCTION page.
When using another battery which cannot be selected
using the BATTERY SELECT item setting, select TYPE A
or TYPE B, and set the items that correspond to the
characteristics of the battery.
For details, refer to “7-8-4 BATTERY SETTING2.”
<Note>
Address all inquiries concerning the V-mount adapter
plate to your dealer.