Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 13)

13
POWER SUPPLY
The Veo 100Nx utilizes one (1) type CR 2450 Lithium 3 volt cell
that should provide 300 hours of continuous, or 50 activation
periods, of operation.
If you conduct 1 dive each time the unit is activated, you should
obtain approximately 50 dives.
If you conduct 3 dives each time the unit is activated, you should
obtain approximately 150 dives.
Battery Indicator
A Battery Indicator provides an indication of battery condition.
When power is sufficient for normal unit operation, the Indicator
will be displayed during Surface Mode (Fig. 7a). The Indicator
will not be displayed during Dive Mode(s).
Low Battery Condition
Voltage level is checked upon activation and every (1) minute
during operation on the surface.
 When 75 % of the Rated Power has been consumed, the
lower bar of the Battery Indicator (only segment) will be
displayed, and the outline of the Indicator will flash once per
second (Fig. 8) as a warning that the Battery is to be re-
placed prior to conducting any further dives.
Fig. 8 - LOW BATTERY
Fig. 7 - BATTERY ICON
a