Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 41)

41
Delayed Violation Mode #3 (Fig. 44)
If you descend deeper than 330 FT (99.9 M), the loaded TLBG
segments will flash, and the Current Depth and Max Depth
displays will only indicate 3 dashes ( - - - ).
Upon ascending above 330 FT (99.9 M), the Current Depth
display will be restored, however, Max Depth will only display 3
dashes for the remainder of that dive. The Log for that dive will
display 3 dashes as the Max Depth achieved.
Immediate Violation and Violation Gauge Mode
During a Dive, if a ceiling much greater than 60 FT (18 M) is
required, an Immediate Violation Mode will be entered. This
situation would be preceded by entering Delayed Violation
Mode #2.
The Veo 100Nx would then operate with limited functions in
Violation Gauge Mode during the remainder of that dive and for
24 hours after surfacing. Violation Gauge Mode turns the Veo
100Nx into a digital instrument without any decompression or
oxygen monitoring functions. Only Current Depth, Max Depth,
Elapsed Dive Time, and the Variable Ascent Rate Indicator will
be displayed (Fig. 45). The TLBG and O2BG will both flash as
a warning of this condition.
Fig. 44 - DELAYED
VIOLATION #3
Fig. 45 - VIOLATION GAUGE
MODE