Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 19)

19
Wet Contact Activation (only if Wet Activation is set ON)
The Veo 100Nx will also automatically activate by Wet Contact.
This is accomplished by bridging the gap between contacts
located on the Button's stem and back of the case.
If no dive is made within 2 hours after initial activation, the unit
will automatically deactivate. If the wet contacts are still
bridged, the unit will reactivate and display the H2O graphic.
SURFACE SEQUENCE
While on the surface, the unit will automatically scroll through a
Sequence of displays including -
 Surface Mode
 Fly Mode
 DeSat Mode
 Plan Mode
As the Surface Sequence is scrolling, you can use the button to
access Log Mode and Set Mode.
SURFACE MODE
Surface Mode, identified by the Surface Time icon (Fig. 15a),
follows Diagnostic Mode after Activation. Information includes
Dive Number (0 if no dive made yet), Temperature (and icon),
Time of Day (with icon), the Battery Indicator, and Surface Time
(with flashing colon).
Fig. 15 - SURFACE MODE
(module is dry)
a