Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 20)

20
If the wet contacts are bridged, the graphic H2O will appear in
place of the dive number 0 (Fig. 16). After the unit is rinsed and
dried, 0 will replace H2O.
While the Surface Sequence is scrolling -
 press/release the button (< 2 seconds) to access Log Mode.
 depress the button for 2 seconds to access Set Mode.
SET MODE
After gaining access to Set Mode, settings can be made in
sequence one after the other, or you can access a specific item
that you want to set, bypassing others.
Set Mode Access/Timing
To access Set Mode while the Surface Sequence is scrolling,
press/release the button momentarily (< 2 seconds).
 Upon entry into Set Mode, the Set FO2 screen will be
displayed with the Set Point flashing (Fig. 17).
 If the button is not pressed during a 2 minute period while in
the Set Mode, the unit will revert to Surface Mode and
resume the Surface Sequence scroll.
Fig. 17 - SET MODE ENTRY
Fig. 16 - SURFACE MODE
(module is wet)