Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 23)

23
TO SET - UNITS OF MEASURE
Factory set for Imperial, Units of can also be set for Metric.
 After having set and accepted Wet Activation, the Set Units
screen appears with the Set Point flashing (Fig. 21).
- - or - -
 While the Surface Sequence is scrolling, depress the button
for 6 seconds to bypass Set FO2 and Set Wet Activation.
 Release the button when the Set Units screen appears with
the Set Point flashing.
 Press/release the button (less than 2 seconds) to toggle
between Imperial (FT and F) and Metric (M and C) units.
 Depress the button for 2 seconds to accept the Units Set Point
and advance to Set Hour Format.
Fig. 21 - SET UNITS OF
MEASURE