Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 56)

56
CARE AND CLEANING
Protect your Veo 100Nx from shock, excessive temperatures,
chemical attack, and tampering. Protect the lens against
scratches with a transparent Instrument Lens Protector. Small
scratches will naturally disappear underwater.
 Soak and rinse the Veo 100Nx in fresh water at the end of
each day of diving, and check to ensure that the areas
around the low pressure (depth) sensor (Fig. 63a) and button
are free of debris or obstructions.
 To dissolve salt crystals, use lukewarm water or a 50%
white vinegar/50% fresh water bath. After removal from the
bath, place the unit under gently running water and towel
dry before storing.
 Transport your unit cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Veo 100Nx should be inspected annually by an
Authorized Oceanic Dealer who will perform a factory pre-
scribed function check and inspection for damage or wear. To
keep the 2 year limited warranty in effect, this inspection must be
completed one year after purchase (+/- 30 days). Oceanic
recommends that you continue to have this inspection performed
every year to ensure it is working properly. The costs of annual
inspections are not covered under the terms of the 2 year limited
warranty.
Fig. 63 - BACK OF CASE
a