Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 46)

46
POST DIVE SURFACE MODE
When you ascend to 2 FT (0.6 M) or shallower, the Veo 100Nx
will enter Surface Mode and begin counting Surface Interval.
TRANSITION PERIOD
The first 10 minutes is, in affect, a Transition Period during which
time the following information is displayed (Fig. 50):
 Number of that dive (during that activation period)
 Temperature (ambient)
 Time of Day and icon
 Battery icon
 Surface Interval time (colon flashing) and icon (flashing)
 Tissue Loading Bar Graph
 O2 Bar Graph (if set for Nitrox)
During the Transition Period, Log Mode can be accessed. No
other modes (e.g., PDPS, Fly, Desat, Set) are accessible.
To view the Log for that dive (Fig. 51), press/release the button
(less than 2 seconds).
Log Data will not be stored in the unit's memory until the 10
minute Transition Period on the surface is completed.
Fig. 50 - TRANSITION
PERIOD
Fig. 51 - LOG MODE
(during Transition Period)