Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 49)

49
Log Mode
The Veo 100Nx will store up to 12 dives in its Log for viewing. Once the Log is full (12
dives), each subsequent dive will then overwrite the oldest dive stored in the Log. It is
therefore suggested that you transfer the Log's data to your log book at the end of each
day of diving.
Log data will not be lost when the battery is removed/replaced, however, factory service
and calibration will delete the data.
The first dive conducted each time the unit is Activated will be #1, therefore there may be
multiple #1 dives in the Log.
Each dive has 3 Log screens - Dive Identifier (Preview), Dive Data, and O2 Data (if a
Nitrox dive). Dives are displayed in a reverse sequence that starts with the dive most
recently recorded, back to the oldest one stored. The most recent dive will always be the
first shown in the sequence.
To access Log Mode -
 Press/release the button momentarily (< 2 seconds) while the
unit is scrolling through the Surface Sequence.
 The first screen (Dive Preview/Identifier) of the most recent
dive conducted will appear displaying (Fig. 55) -
 Log Mode icon
 Dive Number (for that activation period)
 Time of Day, that the dive started (Hour/Minute)
Fig. 55 - LOG PREVIEW