Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 25)

25
TO SET - TIME
Set for factory local time, the Time can be set to values between 0:00 and 12:59 (AM/
PM) or 0:00 and 23:59.
 After having set and accepted Hour Format, the Set Time screen appears with the Hour
Set Point flashing (Fig. 23).
- - or - -
 While the Surface Sequence is scrolling, press the button for 10 seconds to bypass Set
FO2, Wet Activation, Units, and Hour Format. Release the button when the Set Time
screen appears with the Hour Set Point flashing.
 Press/release the button repeatedly (less than 2 seconds each time) to advance the
Hour Set Point in increments of 1 Hour per press of the button.
 Depress the button for 2 seconds to accept the Hour Set
Point, the Minutes Set Point flashes.
 Press/release the button repeatedly (less than 2 seconds
each time) to advance the Minute Set Point in increments of 1
Minute per press of the button.
 Depress the button for 2 seconds to accept the Minute Set
Point and advance to Set PO2 Alarm.
Fig. 23 - SET TIME