Oceanic Personal Dive Computer Veo 100Nx - Manual (Page 14)

14
 Upon decreasing to a voltage level that will no longer sustain
proper operation, the Indicator will flash 5 times followed by
shutdown of the unit.
 If a Low Battery Condition exists when the unit is activated
(by pressing the button), the graphic bAT and the Battery
Indicator will appear flashing for 5 seconds followed by
shutdown of the unit.
 If the button is not pressed to activate the unit prior to a dive,
and a Low Battery Condition exists, the Battery Indicator will
appear flashing as a warning upon descent to 5 FT (1.5 M).
No other information will be displayed.
 If the unit did not display a Low Battery Condition 'prior to'
entering the Dive Mode, and a Low Battery Condition occurs
during the dive, there will be sufficient battery power to
maintain unit operation for the remainder of 'that dive'. The
Battery Indicator will then appear after the dive upon entry
into Surface Mode.
R
E
S
P
O
N SIBLE
D
IV
E
R