TechniSat S1 - Manual (Page 17)

6.3 Audio/Video settings
To optimize your digital receiver in conjunction with your tele-
vision set, you can make further settings in the menu
Audio
/Video settings.
>
Press the
Menu key to display the Main Menu.
> Use the
up/down arrow keys to mark the line
Settings.
> Confirm by pressing
OK. The sub-menu Settings
will be displayed. (Fig. 6-4)
> Now use the up/down arrow settings to mark the line
Audio/Video settings .
> Confirm by pressing
OK. The menu Audio/Video
settings will be displayed. (Fig. 6-5)
> Use the
up/down arrow keys to move the marker
around within the menu, in order to change the set-
tings as indicated. Please also note the messages
displayed on screen in some cases.
The following adjustments may be made:
6.3.1 Picture format TV set
> Use the
left/right arrow keys to select the picture
format appropriate for your TV set,
4:3 or 16:9. This
function automatically adjusts the picture format for
your television set.
6.3.2 Language (Audio signal)
> In this line, use the
left/right arrow keys to select
your preferred language. This function will automati-
cally select the preferred language, where available,
after a programme scan.
6.3.3 Language (Sub-titles)
The DVB receiver is equipped to display sub-titles on screen.
These will be displayed automatically if the function Sub-titles
has been activated, and if the sub-titles are being broadcast
in the language selected.
If the function has not been activated, sub-titles can be acti-
vated manually. Sub-titles are indicated by the symbol
in
the information box. Please also note Point 7.13 of the opera-
ting manual.
6.3.4 TV SCART mode
In this line, use the
left/right arrow keys to select the
appropriate mode for your TV set, either
FBAS or RGB. The
setting for standard sets is
FBAS.
6.3.5 Video system
In this line you must set the appropriate television broadcast
17
(Fig. 6-1)
(Fig. 6-2)
(Fig. 6-3)
Bed_anl_.qxd 20.02.04 16:28 Seite 17