TechniSat S1 - Manual (Page 53)

While the scan is in progress, you can follow this on screen
as the various transponders are scanned. When the scan has
been completed, the number of transponders found, the num-
ber of programmes found as well as the number of new pro-
grammes found will be shown on screen. In addition, a
prompt will appear (Fig. 8-19), asking whether you wish to
include the programmes found automatically in the TV or
Radio list. If you want to include the programmes automati-
cally, you can select whether to include them in the
Favourites list in
sorted or unsorted order.
Sorted
The programmes found will be sorted into the Favourites list
in accordance with a pre-programmed list order. The order in
which programmes are sorted will depend on the audio
language was selected in Point 6.3.2 resp. on the country
selected in Point 6.2.2 and 6.2.3.
Unsorted
The newly found programmes are added to the end of the
Favourites list in unsorted order.
No
The newly found programmes will not be included in the
Favourites list, and will be added only to the Total list.
> Use the left/right arrow keys to select whether you
wish to include the programmes in
sorted or
unsorted order.
> Confirm by pressing
OK.
Please note any further messages displayed on
screen.
> Press the
Menu key to revert to normal operation.
> Independently of whether you have chosen to include
the programmes found into the Favourites list, you
can also still include these in the Favourites list
manually, as described in Chapter 8.1.
8.5 Service settings
You can at all times revert to the default settings pre-pro-
grammed at the factory. Also, should the programme list be
outdated by virtue of the many changes effected by program-
me providers, you can delete the programme list completely,
to be followed by a new programme scan. Please note that, if
you have performed the delete function, you must then start
a programme scan, and must copy the desired programmes
from the Total list to the Favourites list.
>
Use the
Menu key to call up the Main Menu. (Fig.
8-20)
> Now use the
up/down arrow keys to mark the
menu line
Settings.
> Confirm by pressing
OK.
The sub-menu
Settings will be displayed.
53
(Fig. 8-10)
(Fig. 8-9)
Bed_anl_.qxd 20.02.04 16:29 Seite 53