TechniSat S1 - Manual (Page 32)

Deleting an SFI timer event
>
If you wish to delete a timer event programmed via
SFI, proceed as described above to mark the selected
programme.
> Press the
red function key Timer to open a selection
window.
> Use the
up/down arrow keys to mark the line
Timer delete.
> Confirm by pressing
OK.
> To delete an active timer, switch the digital receiver off
by pressing the
On/Standby key.
> Press this key again to switch the receiver on, and
revert to normal operation.
7.14.7.3 SFI programme overview
Use the SFI programme overview to display a table showing
the current day’s programme for a single channel. Proceed as
follows:
>
Press the
SFI key.
The SFI table “
Now” will be displayed.
> Press the
blue function key SFI Menu to open a
selection window.
> Use the up/down arrow keys to mark the line
Programmes.
> Confirm by pressing
OK. The current day’s overview
of the selected programme will be displayed. (Fig. 7-
19)
> Now use the
arrow keys to move the marker to the
desired time or programme.
The individual days of the week are shown at the bot-
tom of the screen.
If information is available for the following days, the
corresponding fields will be highlighted.
> To display the programme content of a particular day,
use the
numeric keys to select the corresponding
day.
Display SFI overview of other programmes
>
Press the
green function key Programmes.
A list of SFI programmes will be displayed.
(Fig. 7-20)
> Now use the
arrow keys to mark the desired pro-
gramme.
> Press
OK to display the SFI overview of the marked
programme.
7.14.7.4 SFI overview by programme type (genre)
If you are interested in particular types of programmes, you
can have the programme information displayed in certain pro-
gramme categories (genres), such as news, movies, etc..
>
Press the
SFI key to display the SFI table “Now”.
32
(Fig. 7-16)
Bed_anl_.qxd 20.02.04 16:28 Seite 32