TechniSat S1 - Manual (Page 30)

7.14.4 Now (table with current programme contents)
Initially, the SFI table “
Now” (Fig. 7-16) will be displayed,
showing programmes currently being broadcast. The yellow
bar to the right of the programme name indicates the elapsed
broadcast time of the current programme. The programme
currently selected is highlighted.
>
Use the
up/down arrow keys to move the marker
one line at a time. Use the
left/right arrow keys to
move the marker one page at a time (paging).
> You can now utilise the SFI functions (Point 7.14.3).
> Press the
yellow function key to move to the SFI
table “
Next” (See Point 7.14.5)
or
>
press the
TV/Radio key to revert to normal operation.
7.14.5 Next
> Use the
yellow function key to display the table
"
Next" (following programmes) (Fig. 7-17).
> All the SFI functions are available (Point 7.14.3).
> Press the
yellow function key to move to the SFI
table “
More” (Point 7.14.6)
or
>
Press either the
green function key or the Back key
to revert to the previous SFI table “
Now”
or
>
Press the
TV/Radio key to revert to normal opera-
tion.
7.14.6 More
> By pressing the
yellow function key again while the
SFI table “
Next” is displayed you can move to the SFI
table “
More”. (Fig. 7-18)
This table displays an additional time window in the
title line. This time window shows the current time of
the SFI table displayed.
> Press the
yellow function key to page further through
the programme in the time steps indicated in the
yel-
low colour bar.
> Keep the
yellow function key pressed down to conti-
nue paging. A clock will be displayed to facilitate the
search.
Press the
green function key to page backwards
through the tables.
The individual days of the week are shown along the
bottom of the screen. If information relating to the follo-
wing days is available, the appropriate fields will be
highlighted.
> To display a preview for a particular day, press the
appropriate
numeric key.
30
(Fig. 7-15)
Bed_anl_.qxd 20.02.04 16:28 Seite 30