TechniSat S1 - Manual (Page 26)

Dolby Digital.
> Confirm by pressing
OK.
You can now enjoy the programme in Dolby Digital sound. If
you would like your receiver to present programmes in Dolby
Digital automatically, set the unit to automatic AC3 reproduc-
tion as described in Point 6.3.6.
7.6 TV/Radio switching
The pre-programming includes radio as well as TV program-
mes.
>
Use the
TV/Radio key to switch the digital receiver to
Radio mode. The receiver will switch to the radio pro-
gramme last selected.
> Press the
TV/Radio key again to revert to the TV
programme last selected.
7.7 Revert to last programme selected
> Press the
Back key on the remote control to view the
last programme viewed previously.
> Press the key again to revert to the programme selec-
ted b efore that, i.e. originally selected.
7.8 Display time and programme information
This function allows you to view programme information rela-
ted to the programme currently being viewed.
>
Press the
Info key to display information related to
the current programme (Fig. 7-12).
The lower half of the screen will now show the current time,
the name of the channel selected, the name of the current
programme including the starting and ending time, where pro-
vided by the programme provider.
7.9 Additional programme information
Where broadcast, the function Programme Information allows
you to receive additional information related to the program-
me selected.
>
Press the
Info key twice to open an additional infor-
mation window (Fig. 7-13). More detailed information
related to the current programme will be displayed.
> You can scroll through lengthy texts by using the
left/right arrow keys to move the text one line at a
time.
> Where provided, pressing the
Info key again will
display information related to the following programme.
> Press the
Info key again to close the additional win-
dow.
7.10 Transponder information
> Press
OK to call up the navigator.
26
(Fig. 7-5)
Bed_anl_.qxd 20.02.04 16:28 Seite 26