3 reception of encrypted programmes – TechniSat S1 User Manual

Page 23

Advertising
background image

(Fig. 7-2)
In addition, the entry

Hard drive recordings will

be shown, allowing you to access the hard drive navi-
gator (Point 7.15.2).

>

Use the

up/down arrow keys to select a program-

me list type, e.g.

Total list.

>

Confirm by pressing

OK.

The alphabetically sorted total list will be displayed,
containing all programmes. (Fig. 7-3)

>

Use the

up/down arrow keys to select the pro-

gramme you wish to view or listen to.

>

Confirm by pressing

OK.

or
>

Press the

green function key PVR to go directly to

the hard drive navigator.

7.2.4 Accessing blocked programmes

If a programme is selected that is blocked by the parental
control function, the message

Unit PIN will be displayed on

screen. (Fig. 7-4)
>

Use the

numeric keys to enter your PIN code. The

selected programme can now be viewed.

or
>

Switch to a programme whose access is not blocked.

If you have selected the option

on under Point 8.3.2, you will

always be prompted to enter the PIN code when switching to
a blocked programme. However, in order to make matters
more convenient for you, you need enter the PIN code only
once in each operating phase.

7.2.5 Information box

Each time you switch programmes, an information box (Fig.
7-5)
will be displayed briefly, showing the programme number
and name of the selected programme. In addition, some pro-
gramme characteristics will be indicated, for example

for

Video text,

for a 16/9 broadcast,

for sub-titles,

for encrypted programmes. Also, where provided, the EPG
category and the FSK age restriction in Germany (Freiwillige
Selbstkontrolle der Filmwirtschaft) will be indicated.

7.3 Reception of encrypted programmes

Your receiver is equipped with a “Common Interface”. This
enables you to receive encrypted programmes. To do this,
you must first insert a CI module together with a valid smart
card into the slot provided:
>

Insert the CI module into the slot.

>

Insert the smart card into the card slot of the CI modu-
le. Note that the gold-coloured chip of the smart card
should be on the upper surface of the card, and poin-

23

Bed_anl_.qxd 20.02.04 16:28 Seite 23

Advertising