TechniSat S1 - Manual (Page 54)

(Fig. 8-21)
> Use the
up/down arrow keys to mark the menu line
Service settings.
> Confirm by pressing
OK.
The sub-menu
Service settings will be displayed.
(Fig. 8-22)
8.5.1 Activate default setting
When this function is selected, the default settings pre-pro-
grammed at the factory are activated again, your own settings
are deleted, and the installation assistant
AutoInstall will
be started.
>
Use the
up/down arrow keys to mark the line
Activate default setting.
> Press
OK.
The following prompt will appear: “Do you really want
to activate the default setting?”.
> Use the
left/right arrow keys to select Yes or
Abort.
> Confirm your selection by pressing
OK.
8.5.2 Delete all programmes
This function will delete all programme memory.
>
Use the
up/down arrow keys to mark the line
Delete all programmes.
> Press
OK.
The following prompt will appear:“Do you really want
to delete all programmes?”.
> Use the
left/right arrow keys to select Yes or
Abort.
> Confirm your selection by pressing
OK.
8.5.3 Updating software
In addition, you have the option of updating the operating
system software of your digital receiver via satellite (ASTRA
19° East).
>
Press
OK to go to the sub-menu Software update
(Fig. 8-23).
To perform a software update, mark the line
Software update.
> Press the
OK key to switch the software update func-
tion to
On.
> In the line
Update time use the numeric keys to
select the time at which the software update is to be
carried out.
> To start the updating of the operating software manual-
ly, press the
red function key Test.
> Press the
Menu key to revert to normal operation.
Should the parameters of the data channel used for downloa-
ding the software updates have changed, these may be cor-
54
(Fig. 8-12)
(Fig. 8-11)
Bed_anl_.qxd 20.02.04 16:29 Seite 54