Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 15)

- xiii -
Organization of this manual
This section describes the organization of this manual and an overview of each chapter. Use it
when you would like to find out something about this device.
Chapter 1 Tandberg LTO2 Autoloader
This chapter describes the features of the Autoloader as well as the package contents and
the names of the parts. It also covers precautions for handling and storage. (See the
description at the beginning of the manual concerning precautions for the safe handling of
the device.)
Chapter 2 Setup
This chapter presents a step-by-step explanation of the procedure from the connection of
the Autoloader to a server or workstation all the way to bringing it up to a usable
condition. The procedure should be followed for proper installation. There is also a
description of the rack mounting method.
Chapter 3 Operation
In this chapter, a description is provided of the TD Autoloader LTO2 operation, front
panel menu organization, and the method of inserting the data cartridge.
Chapter 4 Cartridges
This chapter describes the method of handling the data cartridge that is used in the
Autoloader as well as handling precautions.
Chapter 5 Daily Maintenance
The cleaning method and precautions to take when moving and storing the Tandberg LTO2
Autoloader are described so that the Autoloader can be maintained in the best condition
for whenever it is used.
Chapter 6 Troubleshooting
Should the Autoloader fail to operate properly, please check the details described in this
chapter before assuming a breakdown has occurred. If the problem persists, please
request servicing from a repair company.
Appendix A Specifications
The specifications of the Tandberg LTO2 Autoloader and the data cartridge are listed here.
Appendix B Optional Items and Supplies
Optional items and supplies are listed here.
Appendix C Error Code
This section lists the Autoloader error codes and treatment method.