Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 18)

- 2 -
1.2 Names and Functions of the Parts
This section describes the names and functions of the Tandberg LTO2 Autoloader parts.
1.2.1 Front Panel of the Tandberg LTO2 Autoloader
Figure 1-1 Front Panel of the LTO2 Autoloader
Front door
This door prevents the intrusion of foreign objects. While the power is ON, unlock the door
lock with the door lock key supplied with the main unit.
Key lock
The front door is locked with the door lock key supplied with the main unit.
Pushing in the key and turning it clockwise 90 degrees will release the lock. The unit should
normally be used with the door locked.
Door Locked. Door Open.
Power switch
This switch switches the power of the Autoloader on and off.
A press on the right side ( | ) switches the power ON and a press on the left side (
)
switches the power OFF.