Tandberg Data Autoloader Tandberg LTO2 - Manual (Page 80)

- 64 -
Appendix C Error Code
When an error occurs with the Autoloader, a 4-to-6 digit error code is displayed on the LCD on
the front panel of the Autoloader. Various messages may also be displayed as required.
Error codes are roughly classified according to the leading character string as described below.
Leading character string
CMer : Error related to the transporter
D.err : Error related to the derive interface
Err. : Error related to the panel operation
CMer Error
The 6-digit error codes that are displayed comprise Code 1 (large classification), Code 2
(intermediate classification), and Code 3 (small classification), and the "CMer" character string
is configured at the leading position as described in the examples below.
Examples of error code displays : CMer
: Code 1 (large classification)
: Code 2 (intermediate classification)
: Code 3 (small classification)
CMer Error Code 1
Table-D1 sorts the contents of CMer error code 1 errors.
Displayed here is the large classification of operations at the time of error occurrence.
Table-D1 CMer Error Code 1 Table
Description
20 An error occurring during the Move Medium command execution from SCSI.
30 An error occurring during the Initialize Element Status command execution from SCSI.
40 An error occurring during transporter P move system initialization.
70 An error occurring during transporter Y move system initialization.