Uniden BCT15 - Manual (Page 122)

122
[MENU] WX Operation
F
Program SAME
F
Select the SAME group to edit
F
Edit Name — enter the name you want to assign to the SAME group you
selected.
Edit County — select the position you want to store the FIPS code into, then
press
F
, enter the FIPS code, then press
F
again.
Setting WX Alert Priority
[MENU] WX Operation
F
WX Alt Priority
F
On — the scanner checks the weather channels every 5 seconds for a 1050 Hz
weather alert signal. Press the
F
to select.
Off — the scanner does not check the weather channels. This is the default
setting. Press
F
to select.
Notes:
• You can also turn this option on and off by pressing the front-panel [WX] key.
• When you turn on this option, you will notice a break in the audio every 5
seconds as the scanner checks for the weather alert signal.