Uniden BCT15 - Manual (Page 48)

48
A Look at The LCD Display
Sx: :
This icon appears with icons of Quick Key number for Systems and Sites ( from “0”
to “99”).
“x” shows current ten’s place of Quick Key for System or Site.
GRP :
This icon appears with icons of Quick Key number for Groups (1 - 9, 0) in Function
Mode.
1 - 9, 0 :
In SCAN mode, the numbers of unlocked Quick Key for Systems/Group are
displayed. And a current scanning number blinks.
In SCAN HOLD mode, the Quick Key number of the current System/Group is
displayed.
The numbers of selected User Ranges appear while Custom Search. And the
number of searching Range blinks.
PL, DT, HP, BT :
These icons show Groups’ lockout status of Bear Tracker System.
(PL = Police Groups, DT = DOT Groups, HP = Highway Patrol Groups, BT = Bear
Tracker Groups)
HOLD :
This icon appears in Scan Hold Mode, Search Hold Mode and Close Call Hold
Mode.
DSKP :
This icon appears when the Data Skip function is on.
L/O :
This icon appears at locked out Channel or frequency.