Uniden BCT15 - Manual (Page 99)

99
Programming Your Scanner
to enable a live audio output from REC to an audio recording device.
F
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
[MENU] Program System
F
Select a system
F
Edit Group
F
Select a channel group
F
Edit Channel
F
Select a channel
F
Set Lockout
F
Select from the following choices
F
Unlocked — the channel is scanned when its quick key is enabled.
Temporary L/O — the channel is locked for this session.
Lockout — the channel is not scanned.
[MENU] Program System
F
Select a system
F
Edit Group
F
Select a channel group
F
Edit Channel
F
Select a channel
F
Copy Channel
F
You see Copy Channel Copied to Buffer.
Press [MENU] to return to one level before You see Paste Channel as the last
list item. At this point you can paste that channel information to another group or
compatible system.
Setting Channel Record MECL
Setting Lockout MECL
Copying a Channel MECL