Uniden BCT15 - Manual (Page 42)

42
Finally, many controls and keys behave differently depending on the mode your
radio is in when you use the key or control. Carefully examine the following table to
separate those actions.
Note: “Press” means press and release briefly. “Press and hold” means press and
hold down for at least 2-seconds. “
F
” means Tap or Press the Scroll Control to
put the scanner into Function mode then press the key under discussion.
Controls, Keys, and Functions
1. Power VOL, Mute
• Turn to turn the scanner on or off.
• Turn to adjust the volume [VOL].
• Press briefly to enable Alert Mute temporarily. Press briefly again to turn it off.
• Press and hold to enable Alert Mode continuously. Press briefly again to turn it
off.
2. Squelch [SQ] control, [STATE] Key
• Turn to adjust squelch.
• Press to switch to the State list. Use the Scroll Control to dial to the desired
state. Press
F
to enter your selection.
3. Scroll Control, Function Key, Enter Key (see separate Function Plus
listing)
• Turn to select Channel, Frequency, or TGID in HOLD mode.
• Turn to dial to a menu item in MENU mode.
• Turn to select an alpha-numeric character while editing a name in MENU
mode.
• Turn to resume scanning or searching while monitoring.
• Press/Tap to enter FUNCTION mode. Note this approach results in a 4 second
timeout. The scanner then returns to NORMAL mode.
• Press and Hold to latch FUNCTION mode. Press again to release.
• Press to select
F
a menu item.
• Press plus turn [VOL] to set backlight.
• Press plus turn Scroll Control to move rapidly to a system or custom search
range.
• Turn to use Alphabet Skip in GPS mode.