Uniden BCT15 - Manual (Page 62)

62
Editing A Frequency
To enter a frequency, use the numeric keys and [.No] for the decimal point. Move
to the next place only by turning the Scroll Control. When all the characters are
entered, press
F
to finalize the entry.
Notes:
• Refer to the table that lists the Band Coverage for the scanner. The frequency
entered must be divisible by the value listed in the Step column for that range.
If not, the stored frequency is rounded to either a 5 kHz or a 6.25 kHz step.
• If you enter a frequency for a conventional channel and that frequency is
already stored, the display shows Frequency Exists Accept? (Y/N)
You can confirm acceptance or press [.No] to cancel.
First and Second Menu Levels
The following illustration shows the Base level menu items and, for each of those,
the next level of options. There are additional levels for many of the second level
options but space prohibits the complete layout. This diagram will assist you to
either plan a menu session or to return to an option you might want to edit at a later
time. Details of each and the steps involved in using each are documented in this
manual,